Honda VFR800 Titanium Front Brake Disc Rotor Bolts, 1998-2015

Suitable for the following Honda models:

• VFR800, 1998-2005 (all variants)

Product Information

• Equivalent Honda part number: 90106-MFL-D20
• Guaranteed not to rust or otherwise corrode
• Precision made from aerospace grade 6Al-4V titanium
• 40% lighter than steel equivalents
• Attractive fade-free polished finish
• Forged shank for higher tensile strength, better yield strength, and improved fatigue resistance
• Rolled threads for enhanced fatigue resistance and superior protection against galling
• Accurately formed heads for close tool matching and easy installation/removal
• Pack contents: x12 bolts

Installation

1. Use an M6x1.00mm tap to clean out the threads on your wheel. Please note, old thread lock can cause the new bolts to bind and snap when torque is applied. It is imperative that the receiving threads are clean
2. Use a hex key to drive each bolt into its hole using only your fingers. The bolt should go all the way in without snagging. If it does not, clean the thread again and repeat until the bolt goes in smoothly
3. Remove the bolt, apply thread lock, and drive it in until it is finger tight
4. Repeat until all the bolts are seated
5. Tighten the bolts in a star pattern using a torque wrench to apply 10 N/m
6. Complete the installation by torquing the bolts to 18 N/m

International Customers

• Postage costs are automatically combined when you order more than one item from us
• All items are sent by fully tracked airmail

Specification

• Tensile strength: Heat treated to 950Mpa~1000Mpa
• Yield strength: 870Mpa~925Mpa
• Hardness: 30 HRC-40HRC
• Shear strength: 500Mpa~550Mpa
• Elongation: 14%~18%
• Working temperature: Up to 500°C

Why RSR Moto Titanium?

• Race-proven products at competitive prices
• No-quibble full money-back guarantee on all products
• Same-day dispatch on orders received before 3.30pm (Mon-Fri)
• Industry-leading levels of customer service
• All enquiries are answered promptly and courteously